Enterasys Networks Network Card manual Client Session Report Values, 184

Report Contents	Chapter 8
	Generating Reports

The report also indicates the ISP that was used for each session (or shows “Pre-existing Connection” for non-dialed LAN link or cable modem connections). In addition to the data described in the following table, throughput averages and sums, and login session totals and average intervals are reported for each user and ISP. This report also offers a drill-down view in a subsequent display.

Table 16 lists the column headings and values that appear in a Client Report.

	Table 16 Client Session Report Values
Heading	Explanation
TIME IN	Time the tunnel session started (according to the remote client
	PC’s clock) in the format:
	Year/Month/Day Time
	where Time is shown in military time.
TIME OUT	Timethetunnelsessionended(accordingtotheremoteclientPC’s
	clock) in the format:
	Year/Month/Day Time
	where Time is shown in military time.
HOST NAME	The computer name assigned to the remote client’s computer.
PROTOCOL	The security protocol used on the tunnel:
	IPSEC-HTTPS for an ANG that negotiated the IPSec and
	HTTPS protocols.
	PPTP for an ANG that negotiated thePPTP protocol.
POP PHONE #	Phone number of the POP that Aurorean Client dialed into (“N/A”
	for clients using an existing Internet connection such as a cable
	modem or LAN link).
FROM PHONE #	The remote client’s location phone number (the phone number
	entered on the Aurorean Client From pullout).
CONN TYPE	Type of connection(s) used by the remote client to reach the
	Aurorean Network Gateway. Possible values include:
	Both for sessions involving a dial-up connection into a POP and
	then a tunnel.
	Tunnel for tunnels that used an existing Internet connection
	(LAN link or cable modem).

184 RiverMaster Administrator’s Guide