Enterasys Networks Network Card manual 233

Appendix B Configuring Routing Protocols

ANG-3000/7000 Preconfiguration Stored on a Floppy Disk

.

Figure 132 OSPF Routing Protocol Configuration

2Type the IP address for the Trusted interface in the OSPF Router ID fields.

3From the OSPF Authentication Algorithm menu, choose the authentication algorithm used by routers on your network.

If the routers on your network do not require passwords to accept OSPF updates, set the algorithm to None and continue with the next step.

4Do one of the following:

–Click Apply to save your changes, click Cancel to close the window, and click Next to continue configuration. The Interfaces tab of the Routing Configuration window appears.

–Click Cancel to close the window without saving your changes.

–Click Reset to the return the OSPF properties to their default settings.

RiverMaster Administrator’s Guide 233