Enterasys Networks Network Card manual Do one of the following

Chapter 3 Routing

Configuring an ANG-3000/7000

4Do one of the following:

–Click Apply to save the OSPF parameter changes.

–Click Cancel to close the window without saving your changes.

–Click Reset to the return the interface’s protocol properties to their default settings.

Creating Static Routes

To configure a static route between an ANG interface and another device, perform the following steps:

1 Open the Configuration pullout.

2In the list of Aurorean devices, expand the tree list under Servers (click the + symbol).

3 Expand the tree list under the name of your ANG.

4Click on Routing to display the routing parameter tab pages.

5Click on the Interface tab to display the routing protocol(s) selected for each interface.

6From the Interfaces menu, choose the ANG Ethernet interface to configure (External or Trusted).

7In the Routing Protocol Selection list, double click Static Routes and click Add in the Static Route Configuration window.

The Static parameter tab page is displayed as shown in Figure 38.

RiverMaster Administrator’s Guide 65