Enterasys Networks Network Card manual Creating Static Routes, 239

Appendix B Configuring Routing Interfaces

ANG-3000/7000 Preconfiguration Stored on a Floppy Disk

Figure 136 Routing Interfaces Configuration - OSPF

2Type the same password in the Re-Type Authentication Password field exactly as you entered it in Step 2.

3Do one of the following:

–Click Apply to save the OSPF parameter changes, click Cancel to close the window, and click Next to continue configuration.

–Click Cancel to close the window without saving your changes.

–Click Reset to the return the interface’s protocol properties to their default settings.

Creating Static Routes

The trusted interface should be connected to a protected network segment - one behind a firewall or router that offers protection against unauthorized access. If you prefer to limit the routes the ANG learns or you do not use routing protocols on your network, set up a trusted Static Route.

CAUTION

The ANG requires that a static route be established to the Gateway router from the External interface to enable traffic to reach the Internet. The external interface may reside outside a firewall and offers unfiltered Internet access.

RiverMaster Administrator’s Guide 239