Enterasys Networks Network Card manual Loading the Floppy Disk, 247

Appendix B Loading the Floppy Disk

ANG-3000/7000 Preconfiguration Stored on a Floppy Disk

Figure 142 Save Configuration Window

10Select a directory, either on your computer, the A: drive, or another site on the network and click Save to store the configuration.

NOTE

When saving configuration information, you cannot change its default name config.irx. You may choose a different drive or directory but not a file name. Although you can enter a different file name and receive a message indicating RiverMaster successfully wrote the file, it will always be saved as config.irx.

This concludes floppy disk configuration on RiverMaster. Continue with the next section.

Loading the Floppy Disk

Configuring the ANG with the floppy disk at the remote location is simple. Perform the following:

1Insert the floppy disk in the Floppy Disk drive.

2Reboot the ANG.

RiverMaster Administrator’s Guide 247