Enterasys Networks Network Card manual Viewing Aurorean Alternate Address Information

Viewing Aurorean Alternate Address Information Chapter 3

Configuring an ANG-3000/7000

NOTE

You must configure an IP address on your NAT Server that correlates with the alias IP address you set here.

13Click Apply to save your changes.

To return the parameters to their original settings without saving your changes, click Reset.

14Do one of the following:

–If you are setting up your Aurorean Virtual Network for the first time, continue with the next subsection to configure additional ANG network settings.

–If you are finished with the ANG network configuration and you want to put the new network settings into effect, no additional work is required.

Viewing Aurorean Alternate Address Information

The Aurorean Alternate Address Info window displays IP addresses of the alternate APS and ANG systems, as well as those of the primary system.

To invoke the display, perform the following steps:

1 Open the Configuration pullout.

2Click the arrow on the Configure toolbar item at the top left edge of the pullout.

3Choose Alt IP Addresses as shown in Figure 22.

The Aurorean Alternate Address Info window appears as shown in

Figure 22.

4View the ANG and APS Primary and Secondary (if previously configured) IP addresses.

NOTE

Primary addresses cannot be modified in this window.

42 RiverMaster Administrator’s Guide