Enterasys Networks Network Card manual Click Create, Specify SecurID Configuration File Window

Chapter 4 Adding an Authorization Plug-In

Setting Up Aurorean Services

4In the Identifier field, type a name that remote users will use to select this plug-in.

Aurorean users can include this identifier as part of their VPN user names to override the default authorization plug-in. For example, if you enter ACE as the identifier for this plug-in, Aurorean users can specify a user name such as Bob@ACE to authenticate against the ACE/Server instead of the default plug-in.

5Optionally, specify a value in the Num Threads field.

This function allows the specified number of users to simultaneously log in without delay. The range of threads that can be set is 1 to 100, with a default value set to 10.

6To make this plug-in the default authorization method, place a check next to Default Plug-In.

7Click on SecurID Plug-in.

8Optionally, you can change the values for Timeout and Retry from the default values displayed.

Timeout is the interval in seconds before another authorization attempt is made by the APS. Retry is the number of authorization attempts you will permit the APS to try.

9Click Create.

The Specify SecurID configuration file window appears as shown in Figure 48.

Type the path of the SecurID configuration file (sdconf.rec) on the ACE/Server

or locate with the browse button here

Click here to download the sdconf.rec file

Figure 48 Specify SecurID Configuration File Window

RiverMaster Administrator’s Guide 89