Enterasys Networks Network Card manual Optionally, specify a value in the Num Threads field

Chapter 4 Adding an Authorization Plug-In

Setting Up Aurorean Services

5Optionally, specify a value in the Num Threads field.

This function allows the specified number of users to simultaneously log in without delay. The range of threads that can be set is 1 to 100, with a default value set to 10.

NOTE

Do not set Num Threads to a 0 (zero) value for a RADIUS plug-in. This will cause user login problems. You may set the value to zero for the Enterasys Authentication plug-in.

6To make this plug-in the default authorization method, place a check next to Default Plug-In.

7Click on Radius Plug-In.

8In the Server Address field, enter the IP address or DNS name of the RADIUS server.

9In the Shared Secret field, type the same shared secret password you entered on the RADIUS server.

For more information on shared secrets, refer to the documentation supplied with your RADIUS server.

10Leave the Authentication Port and Accounting Port fields set to their default values.

These values specify UDP port numbers and match industry standards for RADIUS.

RiverMaster Administrator’s Guide 85