Enterasys Networks Network Card manual Adding or Removing a Routing Protocol for an Interface

Routing	Chapter 3
	Configuring an ANG-3000/7000

Click here to open the Configuration pullout

Click here to access the Gateway configuration windows

Figure 34 Aurorean Network Gateway Routing Interface Configuration

Adding or Removing a Routing Protocol for an Interface

To add or remove a routing protocol from an interface, perform the following steps:

1 Open the Configuration pullout.

2In the list of Aurorean devices, expand the tree list under Servers (click the + symbol).

3 Expand the tree list under the name of your ANG.

4Click on Routing to display the routing parameter tab pages.

5Click on the Interfaces tab to display the configuration for each ANG network interface.

60 RiverMaster Administrator’s Guide