Enterasys Networks Network Card Adding Users to a Group, Sample User view is shown in Figure, 134

Creating a New Group Chapter 6

Managing Users & Groups

NOTE

If you allow IPX, rebuild the client kit for that group after setting this policy, then have your users uninstall their old Aurorean Client and install the new Aurorean Client. Client synchronization does not support this change.

12Do one of the following:

–Click Commit to store the new group name on the APS.

–Click Cancel to cancel the operation.

Adding Users to a Group

To add a user to a group, perform the following steps:

NOTE

You only need to add user accounts when using the Authorization service. If you disabled Authorization in favor of authenticating users against a RADIUS or SecurID server, you do not need to create accounts for your remote users. Refer to Chapter 4 for more information on Aurorean Virtual Network authentication techniques.

1Open the Manage Users and Groups pullout.

2Click on the User icon in the lower left corner of the pullout to switch to the User view.

A sample User view is shown in Figure 72.

134 RiverMaster Administrator’s Guide