Enterasys Networks Network Card Backing Up the Database, Click Set to enable the Trace Level

Backing Up the Database Chapter 4

Setting Up Aurorean Services

5Click the arrow in the Trace Level field and select None, Low, Medium or High.

Medium and High trace levels are recommended only for diagnostic purposes and with the supervision of Enterasys Customer Support personnel.

6Click Set to enable the Trace Level.

RiverMaster now begins tracing messages at the level you set.

NOTE

If you want to terminate a particular running service, click Stop. To start up a terminated service, click Start.

Backing Up the Database

The Management database (management.db) is a 1Mb file residing on the APS which contains a list of selected ISPs as well as configuration data for both the tunnel and management servers. To avoid the possibility of down time should the database become corrupted, it is advisable to back it up.

Consult Enterasys Customer Support for directions to reinstall the database.

Two options are available for saving the database. You can simply copy the file into a default directory on the APS or copy it a second time into a directory of your choice on your management device, a remote network site or to a ZIP device.

To back up the Management database on the APS, perform the following steps:

1 Open the Configuration pullout.

2Click on the Activity icon in the lower left corner of the pullout to switch to the Active Tunnel/Service List view.

3Expand the tree list under Active Service List (click the + symbol).

98 RiverMaster Administrator’s Guide