Anritsu ML2430A State Enable or Disable, Returned String Bauts state, Val 10 to 240 minutes

ML24XXA NATIVE COMMANDS GPIB OPERATION

	Syntax:	BAUTS <state>
	state:	ENABLE or DISABLE
	Remarks:	Enable/disable the battery auto power shut off.
		NOTE: Although GPIB is not available under battery operation, the state of
		this parameter can be changed for later use.
	Query:	BAUTS?
	Returned
	String:	BAUTS <state>
BAUTT	Battery Auto shut off after x minutes
			SYSTEM
	Syntax:	BAUTT <val>
	val:	10 to 240 minutes
	Remarks:	Automatically turns the unit off after x minutes when operating on battery
		power.
		NOTE: Although GPIB is not available under battery operation, the state of
		this parameter can be changed for later use.
	Query:	BAUTT?
	Returned
	String:	BAUT <val>
BUFF	GPIB response buffering enabled
			SYSTEM
	Syntax:	BUFF <s>
	s:	ON
		OFF
	Remarks:	If BUFF is ON: In the ML243X native mode, 488.2 GPIB operation, when a
		request for data is made the response is put in an output buffer ready to be

read by the controller. If another data request is made and the previous data has not been read out of the output buffer; the new data is queued af- ter the original request. In this mode of operation the GPIB response buff- ering enable is ON, and following the 488.2 specifications when ever a request for data is made the response should be read.

If BUFF is OFF: In this mode when ever a request for data is made, (ex- cept by serial poll) the output buffer is cleared and the only data in the output queue will be the response to the last data request made. The out- put buffer is cleared once a valid GPIB data request command has been recognised.

6-20 ML2430A OM