Anritsu ML2430A operation manual Rack Mounting, Or Right Option

RACK MOUNTING INSTALLATION

The required parts and tools are listed below:

Quantity	Description	Anritsu Part	Max. Torque
(each)		Number	Setting
2	HANDLE, PULL, CHASSIS, PLASTIC, HARDWARE	783-1055
4	SPEED NUT	790-319
8	6-32, SST, WASHER, FLAT	900-345
4	M4, 8.00 MM, PHH, SCREW, FLAT HEAD	900-795
4	DECORATIVE SCREW	900-821
8	M3X8, POS, SST, PATCHLOCK, SCREW, METRIC,	905-68	.4lbf.in
	PAN HEAD		[45cN m]
6	M3X5, POS, SST, PATCHLOCK, SCREW, METRIC,	905-72	.4lbf.in
	PAN HEAD		[45cN m]
6	SNAP RIVET, PLASTIC	788-575
1	RACK MOUNT, SIDE, BRACKET	C37276
1	REAR SUPPORT, BRACKET, RACK MOUNT	C41449
1	RACK MOUNT, SUPPORT, BRACKET	D41473
1	BRACKET SUPPORT, BASE PANEL	49361
1	FRONT FACE PLATE	49362
1	POWER METER FITTED WITH RACK MOUNT TOP	ML2430A
	AND BOTTOM COVERS

Table 2-1ML2430A-01 Rack Mount Kit Parts List

Tools Required: Small Phillips screw driver

Large Phillips screw driver

Small Phillips torque screw driver 10cNm to 120cNm

Assembly drawing “ML2400A/01 RACK MOUNTED LEFT

OR RIGHT OPTION”

Assembly Procedure 1. Confirm the correct tools are available and the parts listed above are present. Re- fer to diagram on page 2-5 throughout this procedure.

2.Fit the two handles 783-1055 to front plate 49362 and the front rack bracket C37376 using 4 screws 900-795.

3.Lay the large support bracket D41473 next to the Power Meter as per the assem- bly drawing. Note if the PM needs to be mounted on the left hand side of the rack, simply lay the bracket on the PM’s right side. i.e. a mirror image of the assembly drawing.

4.

2-4 ML2430A OM