Anritsu ML2430A State OFF, For example OF1 Turn offsets on, Set offset value, dB increments

GPIB OPERATION HP 437B EMULATION COMMANDS

	state:	0 (OFF)
		1 (ON)
	Remarks:	For example: OF1 (Turn offsets ON).
OI	Return identification string
	Syntax:	OI
	Remarks:	Returned format:
		<company name>,<model>,<firmware version>
OS	Set offset value
	Syntax:	OS<val>EN
	val:	–99.99 to +99.99 dB
	Remarks:	Specifies the offset applied to the displayed value. Values can be entered
		in 0.01 dB increments.
	Example:	OS10.13EN
		Set an offset of 10.13 to the displayed value.
PR	Preset the unit
	Syntax:	PR
	Remarks:	Presets the unit to the HP factory defaults. This command does not effect
		the calibration factors stored in the sensor data tables.
RA	Auto Range
	Syntax:	RA
	Remarks:	Sets the ML2430A Series to automatically select the correct range for the
		measurement.
RC	Recall setup
	Syntax:	RC<val>EN

ML2430A OM 6-111