Anritsu ML2430A operation manual Chapter Front Panel Operation

Chapter 4

Front Panel Operation

4-1

4-2

INTRODUCTION	The ML2430A Series Power Meter is controlled from the front panel using the
	five main menu keys; Sensor, Channel, Trigger, System, and Cal/Zero. This
	chapter explains the power-on procedure and the features and functions of each
	of the menus. Also refer to Appendix C for quick reference Menu Maps.

FRONT PANEL CONTROLS The front panel controls are shown and described in Figure 4-1. The following sections provide more detailed explanations of the Menus and soft keys.

NOTE

Where appropriate, related GPIB commands are listed in brackets under the menu selection. Refer to Chapter 6, GPIB Operation, for in- formation on using GPIB commands.

NOTE

This manual is written for instruments fitted with software 3.00 or above.

ML2430A OM 4-1