Anritsu ML2430A operation manual Query OBZL?

ML24XXA NATIVE COMMANDS GPIB OPERATION

	port:	1 or 2
	val:	–5.00 to +5.00 Volts
	Remarks:	Sets up the stop value for the voltage output in analog output mode. At-
		tempting to set the start value to a voltage greater than the stop value, or
		the stop value lower than the start value, will result in an execution error.
	Query:	OBVSP? <port>
	Returned
	String:	OBVSP <port>,<val>
OBVST	BNC analog output start voltage scale
			BNC
	Syntax:	OBVST <port>,<val>
	port:	1 or 2
	val:	–5.00 to +5.00 Volts
	Remarks:	Sets up the start value for the voltage output in analog output mode. At-
		tempting to set the start value to a voltage greater than the stop value, or
		the stop value lower than the start value, will result in an execution error.
	Query:	OBVST? <port>
	Returned
	String:	OBVST <port>,<val>
OBZL	BNC RF blanking output level when zeroing
			BNC
	Syntax:	OBZL <level>
	level:	HIGH (TTL high)
		LOW (TTL low)
	Remarks:	Sets the TTL level of the BNC RF blanking output.

Query: OBZL?

Returned

String: OBZL <level>

OFFCLR Clear an offset table SENSOR

Syntax: OFFCLR <val>

val: 1 to 5

Remarks: Sets all the values in the table specified to 0 dB and 0.00 Hz.

6-60 ML2430A OM