Anritsu ML2430A Related Commands Sysld, Related Commands Texts Query TEXT?, Syntax TR0

ML24XXA NATIVE COMMANDS GPIB OPERATION

Related

Commands: SYSLD

TEXT User text command SYSTEM

Syntax: TEXT <text string>

text string: Text string of up to 20 characters

Remarks: Defines the text string that will be displayed using the TEXTS command.

Related

Commands: TEXTS

Query: TEXT?

Returned

String: TEXT <text string>

TEXTS User text display command SYSTEM

Syntax: TEXTS <state>

state: ON or OFF

Remarks: This command turns on or off the display of text entered using the TEXT command. Up to 20 characters of user text can be displayed on the top line of the data screen for READOUT, PROFILE and PWRvsTIME display modes.

Related

Commands: TEXT

Query: TEXTS?

Returned

String: TEXTS <state>

TR0 Trigger hold mode GPIB TRIGGER

Syntax: TR0

Remarks: Sets both channels to trigger hold mode. It does not trigger until it receives a TR1 or TR2 or GET (group executive trigger), *TRG or TR3 command. If it receives a TR3 command it reverts back to the trigger mode it was in be- fore the TR0 command was sent. If the REM line is low, this command has no effect.

6-76 ML2430A OM