Anritsu ML2430A operation manual TR3, Syntax ZE

HP 437B EMULATION COMMANDS GPIB OPERATION

Remarks: Triggers a new series of readings; enough to update the internal digital fil- ter for a noise free reading at the current power level. The value is then re- turned on the GPIB and returns to TR0 standby mode.

Related

Commands: TR0, TR1, TR3, *TRG, Group Execute Trigger (GET), GT0, GT1, GT2

TR3 Trigger free run

Syntax: TR3

Remarks: Sets the ML2430A Series back into free run mode on both channels.

Related

Commands: TR0, TR1, TR2, *TRG, Group Execute Trigger (GET), GT0, GT1, GT2

ZE Zero sensors

Syntax: ZE

Remarks: Zero all connected sensors. The ML2430, when emulating the HP 437, may take longer to Zero a sensor than the HP 437 itself. When performing a zero the status byte should be used to identify when ZEROing is com- plete.

6-116 ML2430A OM