Anritsu ML2430A operation manual Related Commands Grdrq Query GRDATA?, Query GRDDT?, Syntax Grdrq

GPIB OPERATION ML24XXA NATIVE COMMANDS

Returned

String: GRCP <state>

GRDATA Display Graph Cursor Data PROFILE SETUP

Syntax: GRDATA <state>

state: ON or OFF

Remarks: Display the graph cursor data readout box. GRDATA must be turned on be- fore attempting to execute the GRDRQ command to send the data over the GPIB. If GRDATA is not on, GRDRQ will produce an execution error in the event status register (ESR).

Related

Commands: GRDRQ

Query: GRDATA?

Returned

String: GRDATA <state>

GRDDT Power vs. Time data display time SYSTEM

Syntax: GRDDT <time>,<units>

time: 1 minute to 24 hours (1440 minutes)

units: MIN (minutes) HR (hours)

Remarks: Sets the time period of the x axis in minutes or hours. For example, either of the following statements may be used to set the time period to 2.5 hours:

GRDDT 2.5,HR

GRDDT 150,MIN

Query: GRDDT?

Returned

String: GRDDT <time>,<units>

GRDRQ Return Graph Data readout DATA OUTPUT

Syntax: GRDRQ

Remarks: Returns the values in the graph data box. GRDATA must be turned on be- fore attempting to execute GRDRQ. The result string is:

ML2430A OM 6-41