Anritsu ML2430A operation manual Examples, dBm Mode and Watt Mode

ML4803A EMULATION COMMANDS GPIB OPERATION

Output Code		Contents	Function
	AUTO		RANGE
ARG1		highest sensitivity 1
ARG2		2
ARG3		3
ARG4		4
ARG5		lowest sensitivity 5
AVE0	OFF		AVERAGE
AVE9	HOLD
AVE1	1	(1 second interval)
AVE2	2	(2 second interval)
AVE3	3	(5 second interval)
AVE4	4	(10 second interval)
Space	+		SIGN
–	–
5 - 1	Numeric data (5 characters) ￿		DATA
	10–(exponent value)

NOTE

When the ODT, OMR, and OPW data output commands are received si- multaneously, only the command which is received last is valid.

Examples:

dBm Mode:

1	5							10					15
V	d	B	m	A	R	G	2	A	V	E	0	-	1	0	.	0	0	<CR><LF>

MEASURED DATA:

REPRESENTS -10.00 dBm

Watt Mode:

1			5		10								15			20
V	W	A	T	T	A	R	G	2	A	V	E	0		1	0	0	.	0	E	-	6

MEASURED DATA:

REPRESENTS 100.0 mW

<CR><LF>

Figure 6-6.Examples, dBm Mode and Watt Mode

6-92 ML2430A OM