Anritsu ML2430A operation manual Channel Menu, Readout display and channel 2 at the bottom

CHANNEL MENU APPENDIX C

C-3	CHANNEL MENU	The Channel menu controls the operation of a display channel. There are two
		display channels, Channel 1 and Channel 2. Channel 1 appears at the top of the
		readout display and channel 2 at the bottom.
Channel
	Setup
		CHANNEL
		1 2
[CHCFG]		INPUT configuration
		Off A B A-B B-A A/B B/A EXT V
		dual sensor configs NOT in ML2437A
		ExtV only available if system setup mode=Readout
[CHUNIT]		Measurement UNITS
		dB(m) W dBuV dBmV
		V when input config = EXT V
[CHRES]		Display decimal RESOLUTION
		1 2 3
[MNMXS, GMNMX]		Tracking MIN/MAX display
		On off
[MMRST]		RESET tracked min/max	} if MIN/MAX = ON
[REL]	Rel 1		} if channel 1 = ON
[REL]	Rel 2		} if channel 2 = ON
	Limits
		CHANNEL
		1 2
[HLIM]		HIGH Limit
		-99.99dB to +99.99dB
		7dBuV to 207dBuV
		-53dBmV to 147dBmV
		0 to 50W
		0 to 20V
[LLIM]		LOW Limit
		-99.99dB to +99.99dB
		7dBuV to 207dBuV
		-53dBmV to 147dBmV

0 to 50W

0 to 20V

C-6 ML2430A OM