Anritsu ML2430A operation manual System, Specifications

		Appendix A
		Specifications
A-1	INTRODUCTION	This appendix provides system specifications for the ML2430A Series
		Power Meters along with listings of system defaults and error messages.
A-2	SYSTEM	This section provides overall system specifications.
	SPECIFICATIONS
		Frequency
		Range:	10 MHz to 90 GHz (sensor dependent)
		Power	Meter specifications apply to MA2400A Series Power
		Sensors:	Sensors. Compatible with MA and MP Series sensors.
		Sensor	MA2420A/B Series Fast Thermal Sensors: 50 dB
		Dynamic	MA2440A Series High Accuracy Power Sensors: 87 dB
		Range:	CW
			MA2470A Series Power Sensors: 90 dB CW
			MA2460A/B Series Fast diode sensors: 80dB
			MA2480A Series Universal Power Sensor: 80 dB
		Power
		Measurement	–70 to +47 dBm (0.1 nW to 50W), sensor/attenuator
		Range:	dependent. Use couplers for higher power levels.
		Voltage Meas-
		urement
		Range:	0.00 to 20.00 V, nominal
		Display Range:
			–99.999 to +99.999 dB
		Display Reso-	Selectable from 0.1 dB to 0.001 dB limited to 0.01 dB
		lution:	in graphical display modes; Linear power units, 3 to 6
			digit, 1 – 3 digits selectable to right of decimal nW – W;
			Voltage, 1 – 2 digits selectable to right of decimal.
		Offset Range:	–99.99 to +99.99 dB. Fixed value or frequency de-
			pendent table.

Display Units:

dBm, dB, dBr, dBmV, dB￿V, W, %, Volts

ML2430A OM A-1