REAR PANEL CONNECTORS

CONNECTIONS

An optional rear panel Calibrator connector is offered as an alternative (see Fig- ure 3-2). If the rear panel connector option is installed, the front panel connector is not installed. Refer to Chapter 5, Procedures, for information on using the Cali- brator output.

Sensor A This connector is a 12-pin circular precision connector to be used in conjunction

Connector with power sensor cables. An optional rear panel Channel A connector is offered as an alternative (see Figure 3-2). If the rear panel connector option is installed, the front panel connector is not installed.

Sensor B This connector is a 12-pin circular precision connector to be used in conjunction

Connector with power sensor cables. An optional rear panel Channel B connector is offered

(ML2438A only) as an alternative (see Figure 3-2). If the rear panel connector option is installed, the front panel connector is not installed.

NOTE

Only MA2400A Series sensors can be connected directly to the ML2430A Series Power Meters. MA4700A and MA4600A Series sensors require the MA2499A or MA2499B Anritsu Sensor Adapter. MP-Series (10-pin) sensors require an MA4001A or MA4002B adapter and an MA2499B.

3-3REAR PANEL

The Rear Panel connectors are illustrated and described in Figure 3-2.

CONNECTORS

 

.

3-2

ML2430A OM

 

 

Page 26
Image 26
Anritsu ML2430A operation manual Rear Panel Connectors, Connections, 3REAR Panel