Anritsu ML2430A operation manual Grfs, State, Grmd, Grpix

ML24XXA NATIVE COMMANDS GPIB OPERATION

GRDRQ <channel_number>,<Cursor_1_dB>,<Cur- sor_2_dB>,<Delta_power>,<Delta_time>[,<Average>]

<Delta_power> and <Delta_time> are absolute values. <Average> is only present when between cursor averaging is turned ON with the GRAVG command.

If no data is available, that is, a sensor is not fitted, the profile is not trig- gered, or the Power vs. Time graph has not reached to the cursor, the out- put for the relevant readout value is 999 output as 9.99e2.

Example result strings might look like:

GRDRQ 1, –10.000, –5.000, 5, 1E-03 (cursor average off)

GRDRQ 1, –10.000, –5.000, 5, 1E-03, –7.5 (cursor average on)

Related

Commands: GRAVG, GRDATA

GRFS	Profile Reference line state			PROFILE SETUP
	Syntax:	GRFS <state>
	state:	ON or OFF
	Remarks:	Turn the profile reference line ON or OFF. The profile reference line is cen-
		tered between the top and bottom of the display.
	Query:	GRFS?
	Returned
	String:	GRFS <state>
GRMD	Profile, Power vs. Time and Source Sweep Mode Channel
				PROFILE SETUP
	Selection
	Syntax:	GRMD <c>
	c:	1 or 2
	Remarks:	Selects the channel displayed on the Profile,	Power vs. Time and Source
		Sweep graphs.
	Query:	GRMD?
	Returned
	String:	GRMD <c>
GRPIX	Profile type
				PROFILE SETUP

6-42 ML2430A OM