WFL 2060 Service Tips
WFL 2060 Service Tips --
-- Test Program (5)Test Program (5)56
Comprehensive Test Sequence Chart
HINT:“n” = spin
speed & nmax=
max. spin speed
of 1000 RPM.
HINT:Rinse/Spin light goes out when max. speed of
1000 RPM is reached. Both Door locked and
Rinse/Spin lights come on when test has ended.
HINT: Before leaving, make sure door isn’t locked. To drain washer to
open locked door (locked during wash or test):
•Exit test program by turning washer off. Turn washer on, then rotate
cycle selectorknob to Drain and push Start button.
•Door can be opened after washer drains and Door locked light
flashes (Door locked light flashes ~ 2 minutes after washer drains).
HINT:Water valves are tested in order:
•Left side of cold water valve (Pre-wash) – flows into right
side of dispenser.
•Hot water valve– flo ws into left side of dispenser.
•Left & right sides of cold water valve (Wash)– flo ws into
right side & center of dispenser.
To exit test program (from any test), turn unit off by pressing
"ON/OFF" button.
1st Edition/Revision 5 (1/20/04)