Anritsu ML2430A operation manual Identification Number General, Information

IDENTIFICATION NUMBER	GENERAL
	INFORMATION

1-4

1-5

IDENTIFICATION	The ML2430A Series ID number is affixed to the rear panel (see Figure
NUMBER	3-2). Please use the complete ID number when ordering parts or corre-
	sponding with the Anritsu Customer Service department.
POWER METER	The ML2430A Series Power Meter is available with either one or two sen-

MODELS, OPTIONS, AND sor inputs, and is delivered with a 1.5m sensor cable (ML2400A-20) for

ACCESSORIES	each input. Model numbers, options, and accessories are listed below.
	Models
	Model No.	Number of Sensor Channels
	ML2437A	Single Channel
	ML2438A	Dual Channel
	Options
	Model No.	Option
	ML2400A-01	Rack Mount, single unit
	ML2400A-03	Rack Mount, side-by-side
	ML2400A-05	Front Bail Handle
		(Options -01 thru -05 are mutually exclusive.)
	ML2400A-06	Rear Panel Mounted Input A
	ML2400A-07	Rear Panel Mounted Input A & Reference
	ML2400A-08	Rear Panel Mounted Inputs A, B, & Reference
	ML2400A-09	Rear Panel Mounted Inputs A & B
		(Options -06 thru -09 are mutually exclusive.)
	ML2400A-11	3000 mA-h, NiMH Battery
	ML2400A-12	Front Panel Cover
		(Can not be used with rack mounted units.)
	ML2400A-13	External Battery Charger
	Accessories
	Part No.	Item
	760-206	Hard Sided Transit Case
	D41310	Soft Sided Carry Case with shoulder strap
	ML2419A	Range Calibrator
	B41323	Serial Interface Cable
	MA2418A	50 MHz, 0 dBm Reference Source

1-2 ML2430A OM