![](/images/new-backgrounds/1184153/184153451x1.webp)
SYSTEM SPECIFICATIONS | APPENDIX A |
Cal Factor Volt- | Operating Modes: |
age | Voltage: Display voltage reading on selected channel. |
Input | Voltage proportional to frequency for sensor calibration |
(BNC): | factor compensation. |
| Blanking Input: TTL levels only. Selectable positive or |
| negative polarity. |
Input Range: 0 |
|
to 20V | Resolution: 0.5 mV |
Control: | Adjustable voltage to frequency relationship |
Analog |
|
Output (BNC): |
|
| Two outputs configurable to Log or Lin |
Operating | Analog Out: Selectable channel adjusted for calibration |
Modes: | factors and other power reading correction settings. |
| Pass/Fail: Selectable TTL High or Low |
| Channel output: Near real time analog. Uncalibrated. |
| AC Modulation Output: Output 1 only. |
Output Range: |
|
| |
Resolution: | 0.1 mV |
Trigger Input:
Operating
Modes: External TTL or RF Blanking.
GPIB Interface:
LE0, SR1, RL1, PP0, DC1, DT1, C0 and E1.
RS232: Supports software download and GPIB commands.
Parallel Printer Compatible with HP Deskjet 540 and 310 Models other
Output: 500 Series and 300 Series and later are typically com- patible. Also Canon BJC 80. See printer manual for DIP switch settings.
General Specifications
General:
ML2430A OM | |
|
|