GPIB OPERATION | ML24XXA NATIVE COMMANDS |
Syntax: HOLD <state>
state: ON or OFF
Remarks: This command holds the present graph displayed on the screen and is available in all graph modes. In Profile and Power vs. Time modes, this command will not work when trigger source is set to MANUAL. The held graph can be requested over GPIB by using the OGD or OGBD com- mands. The same graph data will be held until HOLD is switched off.
Related
Commands: OGD, OGBD
Query: HOLD?
Returned
String: HOLD <state>
IBBLP | Blanking active TTL level | BNC |
Syntax: IBBLP <polarity>
polarity: POS (positive, for high TTL level) NEG (negative, for low TTL level)
Remarks: Changes the expected polarity of the TTL Blanking input signal.
Query: IBBLP?
Returned
String: IBBLP <polarity>
KEYCK | Turn key click sound on or off | SYSTEM |
Syntax: KEYCK <state>
state: ON or OFF
Remarks: When ON, an audible annunciator produces a click corresponding to every key press.
Query: KEYCK?
Returned
String: KEYCK <state>
LINK | Trigger linking | TRIGGER |
Syntax: LINK <state>
ML2430A OM | |
|
|
