Anritsu ML2430A operation manual Query GRPTP?, Syntax Grswr, Related Commands Grswp

ML24XXA NATIVE COMMANDS GPIB OPERATION

Remarks: Sets the pre trigger percentage of the profile screen. The percentage of the data collection period that shows pretrigger infomation if the display trigger delay is 1/PRF.

Query: GRPTP?

Returned

String: GRPTP <val>

GRSWP Graph Averaging Number for Profile or Source Sweep PROFILE SETUP

Syntax: GRSWP <s>,<val>

s:A or B

val: 1 to 512

Remarks: If GRSWS is set to ON, the points on the graph represent the averaged value of that point against its averaged value since either the graph averageing was reset, or since it was turned on.

Related

Commands: GRSWR, GRSWS

Query: GRSWP? <s>

Returned

String: GRSWP <s>,<val>

GRSWR Reset Graph Averaging for Profile or Source Sweep PROFILE SETUP

Syntax: GRSWR

Remarks: If the Graph averaging mode in ON, this command resets the data points and restarts the averaging.

Related

Commands: GRSWP

GRSWS

GRSWS Graph Average State for Profile or Source Sweep PROFILE SETUP

Syntax: GRSWS <state>

state: ON or OFF

Remarks: Turns Graph Averaging on or off.

6-44 ML2430A OM