Anritsu ML2430A operation manual Trgtyp, Type, Rise Fall, Trgxttl

GPIB OPERATION ML24XXA NATIVE COMMANDS

		MANUAL (manual push button trigger)
		CONT (continuous)
	Remarks:	This command is overridden by the TR0, TR1 and TR2 commands when
		in READOUT or POWER vs. TIME mode. If TR3 is sent, the trigger source
		reverts back to the previously selected type of triggering.
		Select channel 1, 2 or 1&2. Selecting 1&2 allows both channels to trigger
		together on the same conditions without having to set up two sets of trig-
		ger data.
	Query:	TRGSRC? <c>
	Returned
	String:	TRGSRC <c>,<source>
		The TRG type commands return the trigger state of the selected channel if
		the channel is ON. This depends on the settings of the “link triggers” flag
		and the current mode of the sensor on the selected channel. If the channel
		is OFF, the stored trigger state of the channel is returned.
TRGTYP	Set Trigger type
			TRIGGER
	Syntax:	TRGTYP <c>,<type>
	c:	1, 2 or 1&2
	type:	RISE
		FALL
	Remarks:	Sets the control type of the trigger used when the source is set to either
		INTA or INTB (internal A or B) in READOUT or POWER vs. TIME mode.
		Select channel 1, 2 or 1&2. Selecting 1&2 allows both channels to trigger
		together on the same conditions without having to set up two sets of trig-
		ger data.
	Query:	TRGTYP? <c>
	Returned
	String:	TRGTYP <c>,<type>
		The TRG type commands return the trigger state of the selected channel if
		the channel is ON. This depends on the settings of the “link triggers” flag
		and the current mode of the sensor on the selected channel. If the channel
		is OFF, the stored trigger state of the channel is returned.
TRGXTTL	Set external trigger edge type
			TRIGGER
	Syntax:	TRGXTTL <c>,<type>
	c:	1, 2 or 1&2

ML2430A OM 6-81