Anritsu ML2430A operation manual Offtyp, Type OFF Fixed Table, Offval, Syntax Ogbd

GPIB OPERATION ML24XXA NATIVE COMMANDS

–10.234 becomes 10479, converted to hexadecimal FFFFD711. See the programming examples for more detail.

OFFTYP Offset type to use SENSOR

Syntax: OFFTYP <s>,<type>

s:A or B

type: OFF FIXED TABLE

Remarks: Selects the type of offset to use.

OFF = No offset to be used.

FIXED = Use the fixed value (OFFFIX) specified.

TABLE = Use the Offset table (OFFTBL) specified.

Query: OFFTYP? <s>

Returned

String: OFFTYP <s>,<type>

OFFVAL Sensor Offset Value SENSOR

Syntax: OFFVAL <s>

s:A or B

Remarks: Returns the Offset value being applied to the specified sensor.

Related

Commands: OFFTBL, OFFTYP

OGBD Output Graph Binary Data DATA OUTPUT

Syntax: OGBD

Remarks: Output the next complete set of graph data to the GPIB in the long integer form of 1024 bits per dB as a definite length arbitrary block response data. The C programming example 'Binary output decoding' on page 6-133shows how to extract the binary data. The response form is as follows : OGBD <#><length><number_of_bytes><data_byte_1><data_byte_2>

...<data_byte_n><\n>

<length> number of ASCII characters that make up the number_of_bytes value

<number_of_bytes> number of bytes of data contained in rest of the string <data_byte_n> four of these values makes up the long integer.

ML2430A OM 6-63