Anritsu ML2430A operation manual Query RSBAUD?, Query RSMODE?

ML24XXA NATIVE COMMANDS GPIB OPERATION

Remarks: This function is used to toggle a sensor’s range hold off or on, to set a spe- cific range to be held, or to select AUTO ranging. RGH sent with only the sensor parameter will toggle the sensor between holding the present oper- ating range and AUTO. If RGH is sent with sensor and value parameters, the sensor range mode will be set to the range value sent.

Query: RGH? <s>

Returned

String: RGH <s>,<val>

RSBAUD RS232 Baud Rate SYSTEM

Syntax: RSBAUD <val>

val: 12,24,48,96,192 or 384 hundred bits per second

Remarks: Sets the RS232 Baud rate for the rear panel serial port.

Query: RSBAUD?

Returned

String: RSBAUD <val>

RSMODE RS232 Operating Mode SYSTEM

Syntax: RSMODE <s>

s:EXTCOM SRCSWP

Remarks: EXTCOM = External communication. GPIB commands are sent and re- ceived via an RS232 connection.

SRCSWP = Source sweep. Connected to a sweeper so updates to the sweepers power of frequencies etc. are automatically updated on the ML2430A Series also.

Query: RSMODE?

Returned

String: RSMODE <s>

SECURE Secure system state SYSTEM

Syntax: SECURE <state>

state: ON or OFF

6-68 ML2430A OM