Additional information 10
47
En
EnglishFrançaisDeutsch
Nederlands
Italiano Español

Resetting the system

Use the front panel controls to reset all system
settings to the factory default.
• With the system on, press
STANDBY/
ON
while holding down
USB.
The next time you switch on, all the system
settings should be reset.

Setting the Key Lock

You can disable the front panel buttons by
switching the Key Lock feature on.
1
With the system in standby, p
ress
SHIFT+SETUP
and use
/
to choose
KEYLOCK then press
ENTER
.
This is shown in the front panel display.
2Use
/
to select LOCK ON or LOCK OFF
then press
ENTER
.

Using the language code list

Some of the language options (see Language
settings on page 30) allow you to set your
preferred language from any of the 136
languages in the Language code list below.
1 Select ‘Other Language’.
2Use
/
to select either a code letter or
a code number.
3Use
/
to select a code letter or a code
number.
See the Language code list below for a
complete list of languages and codes.
HTZ170_171_270_272_En.book 47 ページ ２００８年２月２８日　木曜日　午後１時２４分