DISPLAYED ERROR MESSAGES
If an error occurs, one of the following messages may be displayed. The message
may only be displayed briefly, so if you are watching for errors, stay by the
machine and watch display.
Display Required Action
The Printer cover is not closed or the paper roll
is out. Close the cover or replace the paper roll.
The original is jammed in the feeder, remove
the original document.
There is a piece of paper jammed in the printer,
remove the jam and perform paper cycling.
Your machine needs to cycle the paper or the
paper roll is not set correctly. Press the Start
key.
There is not enough memory to store your fax
message. Use a lower resolution, or send the
message in several transmissions.
There was an error during transmission or
reception. Press the Stop key to return to
standby mode. Check the Error Report.
The limit of the number of group stations has
been exceeded.
This number is already included in this group or
this RTI/CSI has already been stored for use
with this feature.
You have entered too many digits, check the
number and try entering it again.
This Quick Dial or Speed Dial is not
programmed.
Either there are no messages in memory
waiting for transmission, or you have entered
the wrong file number. Check the file number
and try again.
SOLVING
PROBLEMS
97