MAINTAINING YOUR MACHINE

DAILY CARE

If the room is cold, refer to "Cold Weather Power-up" on page 8 before disconnecting the power cord.

For Type I models only, before turning off the machine make sure that the remaining memory capacity is 100%. If the machine is disconnected, any fax messages in the memory may be lost.

Procedure

1.Check the Check display indicator. If it is blinking, correct the fault.

2.Check the copy quality.

2-1) Place the document in the feeder.

2-2)Type I Models: Press the Start key. Type II Models: Press the Copy key.

3. Disconnect the power cord.

4. Clean the scanner and rollers:

4-1) Open the operation panel.

4-2) Pull up the green levers.

4-3) The Scanner glass [A] (shaded

A

area), which is under the white

rollers[B]. Clean the glass with a

 

cotton swab and alcohol. Clean

 

the feed roller [C] and separation

 

pad [D] with water.

C

 

YOUR MACHINE

MAINTAINING

D

B

91

Page 102
Image 102
Ricoh 170 / 180 manual Daily Care, Procedure