At this time, you can print the user parameter list, press the jkey then press the Yes key.
3. Change the setting of digit 7.
4. If you wish to change the setting, press
7 using the ten keypad.
5. Press the Yes key, then press the Func- tion key.
2. Press the Yes key. Press the kkey until the settings for switch 13 are displayed.
1. Press the Function key and
6,2,2,2,2,6,3 using the ten keypad, then press the Yes key.

SOME ITEMS MUST BE PROGRAMMED FIRST

Cutting the Leading Edge of The Paper

In situations where the machine is not copyingSETTING?or receiving messages veryY/often,j the edge of the paper roll may curl. If this featurePRINTis on,LISTthe machinej will automatically cut off the curled part before receiving or copying.

The machine will cut the leading edge of the paper if a message is not received or a copy made for more than 24 hours. If you wish to change this period, contact your service representative.KPAD/Y/jk

SWITCH13:00000000

SWITCH13:1000KPAD/Y/0000jk

Digit 7

0: The curled edge is not cut automatically.

1: The curled edge is cut automatically

24

Page 35
Image 35
Ricoh 170 / 180 manual SWITCH1300000000, Cutting the Leading Edge of The Paper