ERRATA

[P13] Accessories

One paper holder rod is also packed with the machine.

[P14] Installation Procedure

2-3) Set the paper guides [E] at each end to match [E] the paper size. The paper roll must be set in

the center.

2-4) Insert the rod into the paper roll as shown, then set the roll into the machine (hold the roll in a direction so that it rolls away from you when the leading edge is pulled upward).

NOTE: Make sure the ends of the rod fit into the paper guides

[P15]

Cut off excess paper after plugging in the power cord. Disregard step 2-7 and insert the following after step 3-3:

3-4) Press the start key to cut off the excess paper.

[P85, 86, 87 and 104]

Replace " Memory Storage Report" and "Polling Reserve Report" with "File Reserve Report ".

This report is printed after storage for memory transmission and/or polling reception.

Replace "Polling Result Report" with "Communication Result Report ". This report is printed after memory transmission and/or polling reception .

Part No. H0688690

Page 142
Image 142
Ricoh 170 / 180 manual Errata, P13 Accessories, P14 Installation Procedure, P15, P85, 86, 87