Ricoh 170 / 180 manual Setting?, Printing a Sample of Data on the Reports

PRINTING A SAMPLE OF DATA ON THE REPORTS
4. If you wish to change the setting, press		KPAD/Y/jk
	SWITCH03:00000000
the appropriate key on the keypad.
	digit 7	6	5	4	3	2	0

6. Finish: Press the Yes key, then press the Function key.

NOTE: To switch the Error Report on or off, contact a service technician.

PRINTING A SAMPLE OF DATA ON THE REPORTS

This feature is only available on the Type I model.

For reference purposes, the machine can print the first few inches of the fax message on the following reports:

❐ Communication Result Report

❐ File Reserve Report

❐Communication Failure Report

❐ Polling Clear Report

The procedure to switch this feature on or off is as follows (see page 1 3 if you

need more information about the User Parameter settings ad ustment procedure):
1.	Press the Function key and	SETTING?	Y/j
		PRINTLISTj
	6,2,2,2,2,6,3, using the ten keypad, then
	press the Yes key.		KPAD/Y/jk
2.	Press the Yes key. The settings for
	switch 00 are now displayed.	SWITCH00:00000000
3.	Press the jkey until the settings for		KPAD/Y/jk
	Switch 04 are displayed.	SWITCH04:00000000
4.	The setting that you need to change is	SWITCH04:1000KPAD/Y/0000jk
	digit 7. If you wish to change the setting,
	press 7 using the ten keypad.	Digit 7
6.	Finish: Press the Yes key, then press
		0: This feature is Off
	the Function key.
		1: This feature is On

REPORTS

87