Ricoh 170 / 180 Stored ID Override, Printing the Contents of Stored Polling Messages Type Only

OTHER

2.Press the Start key.

❐ Your fax message is held on polling standby.

NOTE: If you have not yet stored an ID Code using Function 61, you will be asked to enter an ID Code. Proceed in the same way as for step 4 in "Stored ID Override" below.

Stored ID Override		POLLINGSETDOCUMENTOPTIONTRANS		KPADk
	available with Polling Transmission.
This procedure will override the ID Code stored in your machine. The override is
only effective for this one transmission.
1.	Follow both steps in any order:
	❐ Place your document in the feeder.	TRNSMITDIAFAXNUMBEROPTIONk
	See page 79 for options that are
	❐ Press the Function key and 1,2 us-
2.		ID:llll
	PressID?the kkey until "SETPOLLING
	ing the ten keypad, then press the
	Yes key.
	" is displayed, then press the Yes
	key.	SETOPTION		Y/N
3.	Enter the ID code that you wish to use	ID:0824
	for this message. Example: 0824. Press
	0,8,2,4 using the ten keypad.
4.	Press the Yes key.	PUSHOLLINGSTARTTRANS		OPTk
5.	Press the Start key.
	❐ Your fax message is held on polling
	standby.
Printing the Contents of Stored Polling Messages (Type			Only)
1.	Press the Function key and 5,2 using	FILENO.lll	KPAD/jk
	ten keypad, then press the Yes key.	PRINTLISTj/SEARCHk

❐To print list of files press the jkey, then press the Start key.

2.Either:

❐Scroll through the files on the dis- play: Press the kkey until the re- quired file appears. Then press the Yes key.

❐If you know the file number, input it directly: Enter the file number, then press the Yes key.

3.Press the Start key.

CHICAGOFILENO.OFFICE004START/N

78