4. Press the Start key.
1. Carefully place your original into the document feeder.

OTHER

AI Short Protocol (Type I Only)

This feature employs Artificial Intelligence (AI) to learn the communication characteristics of the machines programmed as Speed Dial or Quick Dials. AI Short Protocol helps you to reduce communication costs between machines produced by the same manufacturer. AI short Protocol works if you dial using the Quick Dial, Speed Dial or Redial Keys. The machine at the other end must have the AI Short Protocol Feature.

When you send a fax message, the two machines carry out a handshaking procedure, during which they establish the best way to communicate with each other. Using AI short Protocol, this handshaking procedure only takes place in full the first time you dial a particular number. Your machine remembers the optimum communication parameters for calling that number. The next time you dial that number, the machine will remember these parameters and the preliminary handshaking will be significantly reduced, saving communication costs.

Copying

If you need to make a copy of something, and there is no copier available, use your fax machine.

Copying an original is a good way to test contrastTRNSMITand resolutionOPTIONbefore k sending a document, if you are not sure that the settings that you have chosen are appropriate. The copy made byCOPYMODEyour printer shows you1howSETSthe message would look when received at the other end. If it does not look good, change the settings and try again.

COPYDIALFAXNUMBERMODE 2SETS

2.Type I: Press the Start key.

Type II: Press the Copy key.

3.If you wish, change the number of cop- ies using the ten keypad.

P01COPYING.01/01SET

84

Page 95
Image 95
Ricoh 170 / 180 manual AI Short Protocol Type I Only, Copying