1. Follow both steps in any order.
Press the Pause/Redial key until the required number appears in the display, then press the Yes key twice.
Carefully place your fax message into the auto document feeder

REDIALING

Using the Redial Key

The machine remembers the last 10 (last one in a Type II Model) number that you have input. If you have to redial the numbers, either:

Type I Models: Just press the Redial key until the number or name of the party you wish to redial is displayed, then press the Start key.

Type II Models: Just press the Redial key, then press the Start key.

This feature has the following uses:

If the machine is waiting to redial the other party, you do not have to wait for the redialing interval to expire. Press the Redial key until the required telephone number or name is displayed, then press the Start key.

If you wish to send another message to the same address that you sent one to recently, you don’t have to dial the full number again if it is still in the Redial memory. Place the message in the feeder, then press the Start key.

Press the Redial key until the required telephone number or name is

NOTE: Using Redial, you cannot retry a failedREDIALn08MemoryATLANTAOFFICETransmission.Y/jk However, you can redial the telephone number, as explained in the previous pages (Type I Only).

displayed, then press Start key.

Redial key employs the AI Short Protocol feature.

TRNSMIT OPTIONk

DIALFAXNUMBER

2.Either:

Select another number. (Type I Only: Broadcasting)

Start the transmission : Press the Start key.

48

Page 59
Image 59
Ricoh 170 / 180 manual Dialfaxnumber, Using the Redial Key