Ricoh 170 / 180 manual Switching Local Printing On/Off, Enabling and Disabling the Forwarding Mark

RECEPTION SETTING?PRINTLISTj KPAD/Y/jjkk

Switching Local Printing On/Off

When you switch Forwarding on, messages your machine forwards are not printed. If you wish, you can also print them from your machine.

1.	Press the Function key and
	6,2,2,2,2,6,3 using the ten keypad, then
	press the Yes key.	SWITCH11:00000000
2.	Press the Yes key, then press the kkey
	until the settings for Switch 11 are dis-
	played. Change the setting of digit 6.		KPAD/jk
3.	If you wish to change the setting, press
	6 using the ten keypad.	SWITCH11:01000000
4.	Finish: Press the Yes key, then press	Digit	6
	the Function key.
		0: Local Printing Off
		1: Local Printing On

NOTE: When turned on and your machine fails to forward a message (for exam- ple if the line is busy), you will still have printed copy.

Enabling and Disabling the Forwarding Mark

The forwarding mark is printed at the receiving end on the top of each page of the fax messages that are forwarded from your machine. This mark will help the operator at the other end to recognize messages that have been forwarded. If you wish, you can switch this mark off.

To switch the Forwarding Mark on or off, do the following procedure (See page 100 if you need more information about the User Parameter settings adjustment procedure).

1.	Press the Function key and	SETTING?		Y/jk
		PRINTLISTj
	6,2,2,2,2,6,3 using the ten keypad, then
	press the Yes key.	SWITCH02:00000000KPAD/jk
2.	Press the Yes key, then press the jand
	the kkeys until the settings for Switch
	02 are displayed. Change the setting of			KPAD/jk
	digit 0.
3.	If you wish to change the setting, press
	0 using the ten keypad.	SWITCH02:00000001
4.	Finish: Press the Yes key, then press		Digit 0
	the Function key.		0 Fowarding Mark Off
			1 Fowarding Mark On

74