Ricoh 170 / 180 manual Replacing Paper, Paper Cycling

REPLACING PAPER

When" REPLACE " is displayed, the roll is empty or it is not set correctly. Install a new roll or reset it .

Procedure

1. Lift the catch to unlock the printer cover. Then, hold the paper guides and open the cover.

2.Unpack the new thermal paper and in- cert the rod into the paper roll as shown,

then set the roll into the machine. (Hold the roll in a direction so that it rolls away from you when pulled upwards.)

NOTE: Make sure the ends of the rod fit intothe paper guides.

3. Pull out the leading edge until you can see it and feed the paper between the roller and the cover until it appears out- side the back of the machine.

NOTE: Make sure that there is no slack paper inside the machine and the transparent strip that prevents paper curling is above the copy tray

4.Close the printer paper cover until it audi- bly locks into place.

5.The machine will tear off the excess paper. Press the Start key. NOTE: If you forget this step, you can not receive or copy.

A4	8	1
		/

PAPER CYCLING

If "PUSHSTART" or "UNABLEUSEPRINTER" is displayed, press the Start key.

The paper will cycle and any excess will be automatically cut off.

MAINTAINING YOUR MACHINE

93