Ricoh 170 / 180 manual Manual Conventions, Key Names, Displays, Start key

MANUAL CONVENTIONS

Key Names

On the operation panel, there are four buttons (imjk).They show the directions up, down, left and right. These are the scroll keys. They are often used in the operating procedures to gain access to various features. For example, if you see "Press the k key" in the manual, you are being asked to press the right-pointing arrow of the scroll button. On this machine, the ikey also acts as the No key, the mkey is used as the Yes key.

Displays

Messages seen on the display are shown in a larger box, usually on the right hand side of the page, directly opposite the step that brought it up on the display. After following a step in a procedure, check the display to see if it corresponds to

the one in the manual. This may help you to check whether you are following the

procedure correctly. The following examples show three common types of display.
Example A: The keys that can be	TRANSMIT		Y/START
	471-319266
pressed are shown in the top right. In
this example, you can press the Yes or	SELECTLINE		Y/j/k
Start key.
Example B: The choices of settings for a
feature are shown on the screen. The	kTT	PD
current setting is TT . If you press the k	RTI		ABC
key, the setting will be changed to PD.
Example C: The ABCin the right corner
of the display indicates that you can in-
put letters using the Quick Dial keys,
and numbers using the ten keypad on
the operation panel.

INTRODUCTION

5