NOTE: This information is only for the Type I models.

When your machine receives a new voice message, it can call your programmed station automatically. You can choose a paging number or a telephone number as your station. If you choose the paging number and telephone number as your station, the machine will call only the paging number.

If you follow the procedure below, your pger will display the sender’s telephone number and message numbers when your fax machine has received a voice message.

NOTE: You must program the paging telephone number first.

1.Press the Function key and 6,2,2,2,2,6,1 using ten keypad, then press the Yes key.

2If the above display has not appeared, press the k key until the screen is as shown above.

3.Press the Yes key.

Y/NEXTk

SET PAGING TEL NO.

PAGING TEL KPAD

llllllllllllllllll

4.Input the paging telephone number that you wish to use.

Example: 7227050552 , press 7,2,2,7,0,5,0,5,5,2 using the ten keypad.

5.Press the Yes key .

6.Finish: Press the Function key

PAGING TEL

KPAD/Y/N

7227050552

 

1.Press the Function key and 6,2,2,2,2,6,2 using the ten keypad. Then press the Yes key.

2.Press the k key until "PAGING ON/OFF" is displayed.

Y/NEXT k

SELECT LINE

Y/NEXT k

PAGING ON/OFF

Page 133
Image 133
Ricoh 170 / 180 manual SET Paging TEL no Paging TEL Kpad