Ricoh 170 / 180 manual Installation Procedure

INSTALLING THE MACHINE

Installation Procedure

1 Attach the accessories to the main machine.

1-1) Copy Tray [A]

1-2)	Document Table [B]
1-3) Quick Dial Sheet [C]		[D]
1-4)	Telephone Cord [D]	[C]

NOTE: Make sure the transparent strip that prevents paper curling is above the copy tray.

2. Install a thermal paper roll.

2-1) Lift the catch to unlock the printer cover. Then, hold the paper guides and open the cover.

2-2) Unpack the thermal paper. [E]

2-3) Set the paper guides [E] at each end to match the paper size. The paper roll must be set in the center.

2-4) Install the rod into the paper roll as shown, then set the roll into the machine (hold the roll in a direction so that it rolls away from you when pulled upwards.)

NOTE: Make sure the ends of rod fit into the paper guides there is no slack paper inside the machine.

2-5) Pull out the leading edge and insert it between the roller and the cover until you can see the leading edge of the paper.

NOTE:

❐Make sure the transparent strip that prevents paper curling is above the copy tray.

❐Make sure the paper edges are aligned with the marks printed by the roller.

[A]

[B]

A4	8	1
		/

14