Ricoh 170 / 180 manual User Parameter Settings, Feature, Once, Twice, Times

(* this feature is available only on Type I models).

ON/ OFF SWITCHES AND USER PARAMETERS

A table showing the order of appearance of the switches is given below. Some of these switches may not be seen depending on the options that have been installed in the machine

Feature	Press kkey
Telephone Line Type	None
Authorized Reception	Once
Daylight Saving Time (USA Only)	twice
RDS	3 times
ECM *	4 times
Saving paper	5 times
Auto Cutter	6 times
Forwarding *	7 times

User Parameter Settings

A wide range of features can be switched on or off with the User Parameters. However, this feature is more difficult to use than the On/ Off Switches. The switches and adjustments are presented on theSETTING?screen as rows of digits. EachY/j digit can be either 0 or 1. Each feature is allocatedPRINToneLISTor morejdigit. The value of the digit determines the status of the feature.

The overall procedure is explained below. However, each of the adjustments that can be made using this procedure are explained in the relevant parts of the manual.

1. Press the Function key and

6,2,2,2,2,6,3 using the ten keypad, then press the Yes key.

❐ At this time, you can print a User parameter list. SWITCH00:00000001KPAD/Y/jk Press the jkey, then press the Start key

KPAD/Y/jk

2. Press the Yes key. The current settings for switch 00 are now displayed on the bottom line of the display. If the settings for this switch are the way that you want them, go to step 4.

SWITCH00:00000000

3. To change the required setting, press a number from 0 to 7 using the ten keypad corresponding to the digit that you wish to change.

Example : Press 0. The value of digit 0 changes, in this case from 0 to 1.

102