SENDING IMMEDIATELY VS. SCANNING QUICKLY

Scanning Quickly (Memory Transmission, ype I Only)

10:00AM

1. Make sure that the machine is in

MM.TX100%

 

 

standby mode.

SETDOC.ORDIALNO

The display on the operation panel must be as shown on the right.

2.If the display does not look like above, then press the Line Select key.

3.Follow both steps in any order.

Dial in one of the following ways:

3104719266TRANSMIT Y/STRT

a) Ten Keypad

b) Quick Dial

c) Speed Dial

d) Handset*

If your machine is behind a PBX, dial the access code,MEMDIALthen .TXa pause,FAXNUMBERthen the telephoneOPTIONnumbers.k For international numbers, press the Pause key after entering the country code.

*:Only if the telephone handset is installed.

Carefully place your fax message face down into the auto document feeder.

Selecting Contrast and Resolution: See page 41.

Options for Sending a Message : See page 44.

BASIC OPERATION

Good

The Pages must be placed down in the feeder with the first page at the bottom of the stack.

Feed the pages in so that the top edge goes in first.

Do not feed in more than 10 pages.

Do not use unsuitable type of original (see page 108).

Adjust the document guides to fit the width of the pages.

Do not use pages of different sizes.

Bad

4.Press the Start key.

The machine will scan the document and dial.

FSAVING-001PTO.01MEMORY99%

File Number

37

Page 48
Image 48
Ricoh 170 / 180 manual Scanning Quickly Memory Transmission, ype I Only, Ten Keypad Quick Dial Speed Dial Handset