SOLVING PROBLEMS

DOCUMENT JAMS

If the Check Display indicator is lit, and the message "CLEARORIGINAL" appears on the display, there is a document jammed in the feeder. Do the following to remove the jam.

1.Carefully pull open the operation panel by pulling the top edge of the panel up and away from the machine

2.Take out the jammed document.

NOTE:When you pull out the paper in direction A, slant the operation panel a little.

If the document will not come out, push forward the two green levers. After you have removed the document replace the levers.

3.Close the cover until it audibly locks into place.

NOTE: If you hear an unusual noise when you are closing the operation panel, check the green levers have been pulled down to the bottom correctly.

A

B

94

Page 105
Image 105
Ricoh 170 / 180 manual Solving Problems, Document Jams