RECEPTION

The number of RTI/CSI’s that you can store for use with this feature and the forwarding feature is limited to 30 for Type I Models and 10 Type II Models. However, you can use Wild Cards to extend the number of RTI/CSI’s that you can specify.

NOTE: If you turn Authorized Reception on and you do not program any senders’s RTI’s / CSI’s, your machine will not able to accept any messages. If one of the authorized terminals changes their RTI/CSI, you have to change the stored RTI also. Otherwise, you will not be able to accept messages from that sender any more.

 

 

 

Cross-references

SELECTLINE

Y/NEXTY/NEXTkk

 

 

RTI and CSI: see pages 18 and 20.

TCR: see page 85.

 

 

 

 

Switching Authorized Reception On/Off

Before you use Authorized Reception, you have to switch it on using Function 62. If it is switched off, the machine will accept any incoming fax message.

1.Press the Function key and 6,2,2,2,2,6,2 using the ten keypad. Then press the Yes key.

2.

PressON/OFFthe kkey until "AUTHORIZED

 

 

 

" is displayed.

ON/OFF

3.

Press the Yes key.

 

 

AUTHORIZEDON kOFF

Y/jk

 

 

 

 

Selecting Whether to Exclude or Include

 

 

 

 

SendersSETTING?PRINTLISTjKPAD/Y/Y/jjkk

 

4.

Use the jand the kkeys to switch this

 

AUTHORIZED

Y/jk

 

 

feature on or off.

 

kON

OFF

 

5.

Press the Yes key to store your setting,

 

 

 

 

 

then press the Function key.

 

 

 

 

1.

Press the Function key and

 

 

 

 

 

 

 

 

 

6,2,2,2,2,6,3 using the ten key-pad,

 

 

 

 

 

then press the Yes key.

 

SWITCH08:00000000

 

2.

Press the Yes key, then press the kkey

 

 

 

 

 

until the settings for switch 08 are dis-

 

 

 

 

 

played.

 

 

 

 

ADVANCED FEATURES

67

Page 78
Image 78
Ricoh 170 / 180 manual Kon